Sumitomo Electric Technical Review

SUMITOMO ELECTRIC TECHNICAL REVIEW

A journal of technical papers explaining the Sumitomo Electric’s technologies. Technical papers are available in PDF format.

A journal of technical papers explaining the Sumitomo Electric’s technologies. Technical papers are available in PDF format.

Registration of public notification

If you register your e-mail address, we will notify you when the latest issue is published. If you wish, please register from the registration form.
To delete your registration, please visit here.

Genre

All

Back Number

All

April 2017 No.84

FEATURED TOPIC: Sumitomo Electric’s Efforts in Developing Its Environment & Energy Business and the Present Status of Research & Development Activities

Prefatory Note: Sumitomo Electric’s Efforts in Developing Its Environment & Energy Business and the Present Status of Research & Development Activities

Confronted with global warming and other environmental issues that have become tangible as a result of rapidly growing energy demand, mainly in developing countries, expectations are raising for stable and safe supply of environmentally friendly electric power and other energy sources. Under such circumstances, the environment surrounding electric power and energy is changing dynamically. In particular, expansion of power generation/transmission/distribution networks is being promoted on a global basis, use of renewable energy is increasing, and enhancement of the reliability of electric power systems is required in response to an increase in renewable energy consumption.

Sumitomo Electric’s Activities for New Power System Business

Amid the global changes in the fields of environment and energy, Sumitomo Electric Industries, Ltd. has started new business for energy systems and services. This paper explains the paradigm shifts that the energy field has been going through, and introduces the Company’s efforts in response to the shifts, including its organizational changes as well as the development of new products and technology such as vanadium redox flow batteries and concentrative photovoltaics.

Ni Alloy Laminated High Strength Bi-2223 Wire

Sumitomo Electric Industries, Ltd. has developed and commercialized a high-strength DI-BSCCO Type HT-NX wire. This wire is reinforced with Ni alloy tapes and undergoes residual axial compression after lamination. The wire has a critical tensile stress of 400 MPa at 77K. The new wire structure successfully reduced the splice resistance without sacrificing the mechanical properties. This wire is highly useful for nuclear magnetic resonance and other high field magnetic applications.

Development and Demonstration of Redox Flow Battery System

High expectations have been placed on rechargeable batteries as a key technology to power system reliability associated with introduction of an increasing volume of renewable energy, as well as efficient power supply and successful business continuity planning. We have developed a redox flow battery system that is safe with a long service life. A demonstration proved its applicability to multiple requirements from electric power companies and other businesses. This paper describes the system, demonstration results, and our effort to reduce the price.

CHAdeMO Quick Charger Connector with Excellent Operability

Electric vehicles can be charged by either AC normal charge or DC quick charge. For the latter, a CHAdeMO DC quick charger was developed in Japan and has been widely used in Japan, Europe, and the US. We developed a DC charger connector that meets the CHAdeMO specifications, and have since supplied over 15,000 units of it and other connectors including those for vehicle to home applications. Our connectors have a good reputation for their operability and safety.

Titanium-Manganese Electrolyte for Redox Flow Battery

Large-scale batteries play an important role in the effective use of renewable energy like wind and solar power. Among various battery technologies, redox flow batteries (RFBs) offer high-speed response, independent design of power and energy, high safety, and thus have attracted more attention than ever. All-vanadium RFBs are the most mature technology and have been used in practical applications. As the prices of renewable energy power generation continue to decline, cost reduction of the battery system has become the major issue. In order to reduce the cost, many efforts have been made to develop a low cost electrolyte. We focused on a low cost manganese material, and developed a Ti (IV) and Mn (II) mixed aqueous electrolyte, and applied it to a Ti-Mn RFB. This paper briefly introduces development of electrolyte research and the characteristics of the Ti-Mn electrolyte.

String Monitoring Unit for Megawatt Solar Power Plants

While an increasing number of megawatt solar power plants have been constructed, some of them have already been facing problems with degradation in power output due to initial failures, aging solar panels, or external factors. We have developed a string monitoring unit that uses the power line communication (PLC) technology. These units monitor individual strings of hundreds of thousands of solar panels in real time without the need for wiring additional cables. We installed the units at a megawatt solar power plant, and successfully detected irregularities in power generation by analyzing data collected from the units.

High Corrosion Resistance Conductor for Overhead Transmission Lines

The deterioration of overhead transmission lines in Japan has been continuing and transmission failures caused by corroded aluminum conductor steel reinforced (ACSR) conductors have increased year by year. From the viewpoints of securing reliable power supply and prolonging the life of ACSR conductors, Sumitomo Electric Industries, Ltd. has developed a high-corrosionresistance ACSR conductor jointly with the Kansai Electric Power Co., Inc. (KEPCO). The conductor is highly resistant to sea salt because of the high corrosion resistance offered by aluminum-manganese alloy clad steel wires used in the steel core part. The corrosion resistance of the conductor is about 1.6-2 times higher than that of the conventional ACSR/AC conductor. Using conventional materials for the aluminum wires, this product offers high economic efficiency with a minimal cost increase. Since 2012, the conductor has been installed into many transmission lines in KEPCO’s area and other regions in Japan.

Dynamic Cable System for Floating Offshore Wind Power Generation

Floating offshore wind power generation has attracted increasing attention because of the deep water levels around Japan. We have developed a dynamic cable system that stably transmits electric power from floating offshore wind turbines to a substation on land, and tested it in a demonstration project led by the Japanese Ministry of the Environment. During the demonstration, no problems occurred with the cable system, and a subsequent investigation found no remarkable deterioration. These results confirmed that the cable system withstands mechanical stress caused by the large excursion of hybrid spar-type floaters. We have also developed a method to analyze the behavior of the cable in the sea to optimize the cable installation design and ensure longterm reliability.

XLPE Cable for DC Link

The cross-linked polyethylene (XLPE) cable has been used for DC transmission lines. We have been developing the DC XLPE cable for a few decades, and proved its quality and reliability through the research and development process. In 2012, we delivered the cable to Electric Power Development Co., Ltd. for its 250-kV DC transmission project, making it the world's highest voltage DC XLPE cable at that time and the world's first one to be applied to a line commutated converter system. Following the project, we successfully completed a pre-qualification test for a 400-kV DC XLPE cable. Currently, we are working two new projects: the 250-kV transmission project of Hokkaido Electric Power Co., Inc. and the 400-kV transmission project of NEMO Link Ltd. Our DC XLPE cable has an allowable continuous conductor temperature of 90 degrees Celsius, which is equivalent to the conventional AC XLPE cable, and withstands polarity reversal of voltage. This cable will meet the various needs of DC transmission that are expected to increase in the future.

Optimum Operation Control of Distributed Energy Resources Using ENERGYMATE-Factory

Amid the changes in electrical power supply in Japan, Nissin Electric Co, Ltd. has been developing the Smart Power Supply Systems (SPSS) as a solution that integrates various distributed energy resources for power saving and stable power supply. The core system of SPSS, ENERGYMATE-Factory, enables the optimized control of energy provided by the combination of an electrical substation, one of the company’s major products, and various distributed energy resources such as solar power generators, cogeneration systems, and grid energy storages. This paper describes the ENERGYMATE-Factory and its features, and introduces a practical-scale demonstration conducted at the Maebashi plant.

New Power Conditioner for Large-Scale Power Systems

It has been three years since the Feed-in Tariff (FIT) for renewable energy was introduced in Japan. While a reasonable number of solar power systems have started operation in Japan, functional improvement and cost reduction are still required for overseas solar power plants. We have provided 100-660 kW solar inverters for domestic use, contributing to the installation of megawattclass solar power generators. Drawing on the expertise, we have developed a new solar inverter to meet the needs of overseas customers.

Improvement of Islanding Detector Using Interharmonics Current Injection Method and Its Applications

When distributed power sources, such as renewable energy sources, are interconnected to electric power grids, anti-islanding protection devices are necessary. In 2001, we developed an islanding detector using the interharmonics current injection method, and since then it has been widely used. This paper introduces the principle, fault ride through (FRT) capability, and applications of the detector.

Power System Analysis for Solving Problems with Expanding Introduction of Renewable Energy Sources

The Great East Japan Earthquake and subsequent electricity crisis, introduction of feed-in tariff (FIT) scheme, and the electricity system reform caused huge changes in the Japanese power system. These changes include the acceleration of installing renewable energy equipment, the enhancement of interconnections among regional power electric utilities, and the increase of the new power suppliers resulting from the full liberalization of retail power sales. This paper introduces Nissin Electric’s activities to solve power quality problems caused by the above-mentioned changes, from a viewpoint of the power system analysis.

Aluminum-Celmet―Aluminum Porous Metal with Three-Dimensional Consecutive Pores

Celmet is a material that has a high porosity and a large surface area. Sumitomo Electric Toyama Co., Ltd. has offered nickel and nickel-chromium alloy Celmets. There has been a demand for aluminum porous meatal due to advantages such as the light weight, thermal conductivity, and high voltage resistance. Therefore, we worked on the development of Aluminum-Celmet and succeeded in its production. This paper presents the physical properties, machine properties, and electric characteristics of the Aluminum-Celmet. We also report on the application of Alminum-Celmet to a lithium ion battery.

Copper Recycling Technique Using Electrochemical Processes

The recent growing awareness of the environment and interest in resource saving have raised the importance of metal recycling. As an electric wire maker that handles a large quantity of copper, we strive to promote copper recycling proactively and have developed a copper recycling technique using electrochemical processes for small-scale operations. We made the process as eco-friendly as possible and succeeded in continuously recycling electric wire scrap into high-purity copper.

Magnet Wire with Enhanced Tolerance for High Frequency Voltage

Overvoltage, resulting from the application of a high frequency voltage, and its subsequent steep surge on an inverter-fed motor can significantly damage insulated systems due to partial discharge. Therefore, magnet wire with a high tolerance for surges and low dielectric permittivity is needed. This paper describes our new magnet wire coated with a porous insulator for enhanced surge resistance.

Flexible High-Voltage Cable for HEV/EV

The advancement of hybrid electric vehicle/electric vehicle technology has led to an increase in the size of high-voltage cables used as power cables, and accordingly their flexibility is strongly required for easy handling. Our flexibility simulation revealed that the elastic modulus of an insulator contributes to the cable flexibility more than the structure of a conductor. We found that polyolefin polymers are ideal insulation base-resins because the softness of polyolefin can be controlled by the ratio of the crystal region and amorphous region, which changes with the amount of co-monomers. Using an anti-oxidant agent, flame retardant, and polymer cross-linking, we have developed a new flexible insulation material that meets JASO/ISO standard. Going forward, we will strengthen our product lineup of flexible cables.

History and Future Prospects of Magnet Wire Development

In 2016, it was 100 years since Sumitomo Electric Industries, Ltd. first produced its enameled wire. The magnet wire, coated with an insulation film, has been used in various products including electrical components, household appliances, and electrical conductors, and supported the industry. This paper outlines the history of magnet wire from development to commercialization over the century and introduces our major products. We also discuss the direction of future wire development.

History of Air Spring Development for Shinkansen Trains

Air springs are part of a soft damping suspension system that provides both softness and damping characteristics by utilizing the compressibility and flow resistance of air. They were first used on railways about 60 years ago. The subsequent and continuous advancement of air spring technology is a result of the incorporation of air springs into Shinkansen trains and the acceleration of R&D activities in overcoming various challenges associated with increasing train speeds. To reduce the environmental impact of high-speed trains, the weight of each car was reduced dramatically. In particular, adoption of bolster-less bogies reduced car weight. Together with such technological innovations, the functions of air springs also changed remarkably. To make the Shinkansen competitive with aircraft by increasing both speed and ride quality, various new functional units were developed. Such units include the horizontally nonlinear air suspension system and the car-body tilting system with built-in air springs that enables trains to travel at higher speeds on curved tracks. A project aimed at further increasing train speed has been launched for several train lines. We will continue our R&D efforts to develop air springs that will enable trains to run safely at speeds exceeding 320 km/h while providing a truly comfortable ride.

Mechanical and Electrical Co-simulation Technology for In-Vehicle Power Systems

Car manufacturers and suppliers are offering new systems, such as 48 V power supply or automated driving systems, for 2020 and beyond. Since these systems are closely related to automotive power systems, their deployment makes changes to the power architecture. To analyze requirements for power components, Sumitomo Electric Industries, Ltd. has been developing in-vehicle simulation technology that helps to investigate the relationship between vehicles and their components in performance. This paper introduces the technology to analyze the effect of power components on fuel economy, based on our mechanical and electricalco-simulation.

High-Strength Aluminum Wires for Low-Voltage Automotive Engine Wiring Harnesses

The weight of wiring harnesses has been increasing with the growing number of systems used in vehicles in recent years. For the purpose of reducing their weight, aluminum instead of the conventional copper has been getting popular as a wire conductor. Conventional Al alloys, however, cannot be used for small gauge wires (0.35 mm2 and 0.5 mm2) or in the engine compartments due to their insufficient conductor strength. For this reason, we have developed a stronger Al alloy that has a conductor strength equivalent to or stronger than that of copper, and successfully manufactured a high-strength Al alloy wire for the first time in the industry. Applying it the 0.35 mm2 wire used in engine compartment, we started its mass production in April 2015. The target properties of this alloy were a tensile strength of 220 MPa and conductivity of 50%IACS. Based on the age-precipitated 6000 series Al alloy, additive elements and their content were specified. The aging conditions were determined by examining the precipitation status of Mg2Si intermetallic compounds. With this approach, we achieved a tensile strength of 250 MPa and conductivity of 52%IACS, both of which exceed the targets.

Terminal Plating to Lower Insertion Force of Multiway Connectors

Recent advancements in automotive electronic control systems have led to an increase in the numbers of electronic control units and circuits, and accordingly the number of the necessary connectors and terminals has risen. Meanwhile, multiway connectors require high insertion force, which makes the assembly operation difficult. Therefore, demand has grown for terminal plating that lowers the insertion force. We have developed a tin (Sn) alloy plating technique to replace the widely-used Sn plating. The Sn alloy plating restrains abrasive wear during connector matching and successfully reduces the insertion force.

10G-EPON Dense Wavelength Division Multiplexing Repeater Expands Transmission Distance up to 60 km

We provide advanced broadband technologies and passive optical network (PON) equipment to the market. Recently, we have developed a repeater for 10 Gigabit-Ethernet PON (10G-EPON) systems. Installed between an optical line terminal (OLT) and optical network units (ONUs), the repeater significantly expands the data transmission distance from the conventional 20 km to 60 km. Wavelength division multiplexing (WDM) technology enables its connection to the OLT using an optical fiber and 8 channel support. This paper describes the performance of the repeater and the key technology in relaying upstream burst signals.

E-band 1 W-class GaAs PHEMT Power Amplifier MMIC

E-band wireless communication systems are expected to be used for fiber extension in the fixed network in order to support internet data transmission increased by the introduction of 3G/4G, LTE (Long Term Evolution), and other mobile backhaul services. The E-band communication system works in the 71-76 GHz and 81-86 GHz bands, enabling high data rate transmission of 10 Gbit/s or more. This system requires power amplifiers of an output power of 0.5 W (27 dBm) or higher to transmit high-order modulation signals over a long distance. This report introduces an E-band 1 W (30 dBm) class amplifier MMIC (monolithic microwave integrated circuit) incorporating a stabilization design and GaAs PHEMT (pseudomorphic-high-electron-mobilitytransistor) technology.

S-band 600 W and X-band 200 W High-Power GaN HEMTs for Radar Transmitters

High output power gallium nitride (GaN) high electron mobility transistors (HEMTs) have been developed for S-band and X-band radar applications. The fully internally matched S-band GaN HEMT exhibits a minimum output power of 600 W, a minimum power gain of 12.8 dB, and a drain efficiency (DE) of 60% at 2.7–2.9 GHz for radar applications such as an air traffic control radar. The fully internally matched X-band GaN HEMT exhibits a minimum output power of 200 W, a minimum power gain of 9 dB, and a power-added efficiency (PAE) of 38% at 8.5–9.8 GHz for radar applications such as a marine radar and weather radar. The output power of these GaN HEMTs is the highest in the market, contributing to reduction in the size, weight and power consumption of radar transmitters.

Control of Nano Structure by Multi Films for Nano-structured Thermoelectric Materials

Thermoelectric generators, with which one can directly convert waste heat to useful electric power, have attracted considerable attention as one of the most efficient techniques leading to a low carbon, sustainable society. The figure of merit ZT of constituent thermoelectric materials is generally used as a measure for the efficiency of energy conversion in TE generators, and its value has not reached a large magnitude exceeding 2 for the last half century, despite that ZT ≥ 4 is strongly required for automobile exhaust heat utilization system. This large gap between the required values and obtained ones strongly let us believe that a thermoelectric generator is not usable in practical applications. We need to employ new, innovative techniques leading to a breakthrough for developing high-performance thermoelectric materials. In this study, we tried to control nano-structured particles in amorphous thermoelectric materials so as to drastically improve the thermoelectric properties by means of molecular beam epitaxy for obtaining high performance thermoelectric materials.

High-Strength and High-Conductive Material to Replace Beryllium-Copper Alloys

Copper alloys are widely used in the automotive, electronics, and various other sectors. Among these alloys, beryllium-copper alloys need to be replaced with other materials due to concerns over their effects on human health and the environment. However, they have excellent properties that have slowed the replacement efforts. From this view point, Sumitomo (SEI) Steel Wire Corporation has developed a new steel wire by covering the surfaces of the steel core with a thick layer of copper. This wire provides the strength and yield resistance of steel wire and the conductivity of copper. Moreover, by using different percentages of steel core and copper, the material’s properties can be designed with ease. In fact, evaluations have revealed that the wire has mechanical properties comparable to or better than those of beryllium-copper alloys. This paper presents the results of mechanical property tests conducted on the wire.

New PVD-Coated Carbide Grade AC1030U for Precision Turning

In recent years, automotive components have become smaller and lighter due to the trend of energy saving and fuel efficiency. Accordingly, a wider variety of materials, including those difficult to cut, have been used for these components. Sumitomo Electric Hardmetal Corporation has developed the new coated carbide grade “AC1030U” by applying the new physical vapor deposition (PVD) coating technology “Absotech Bronze” and the new chip breaker “FYS type” that has excellent chip control and high wear resistance in fine finishing. AC1030U with high cutting edge quality and high wear resistance is a general grade used for precision turning. The new grade and chip breaker can satisfy the demand for cost reduction in precision machining for various materials such as alloy steels, carbon steels, stainless steels, heat-resistance steels, and pure iron.

High Quality Agricultural Production Support System by Smart Sand Cultivation Device “New Sandponics”

New Sandponics (NSP) is a unique cultivation device that uses sand as the primary medium, and additionally employs a floor irrigation method in the early Sandponics. Using only 10% of the sand medium volume used in the early Sandponics, NSP reduces the device weight and maintenance costs. The floor irrigation method has enabled us to control water and fertilizer supply depending on the growth phase of crops for high yields and quality. This paper reports on our efforts in increasing the yield of tomatoes by using a new medium with air-rich structures and also presents our attempts at IoT-based agricultural production using Sandponics.

Evaluation System for Chest Compression Training “Shinnosuke-kun”

Sumitomo Riko Company Limited has developed flexible capacitive pressure sensors, the Smart Rubber (SR) Sensor series, by drawing on the polymer-compounding technology it has developed over the decades. Applying this technology, we have developed an evaluation system for cardiac massage (chest compression) training, Shinnosuke-kun. This system gives real-time feedback on the chest compression depth, tempo (rhythm), recoil, and pressure point during chest compression training. The SR sensor can also evaluate the compression depth with the training mannequin placed on soft materials such as a mattress. We believe that the widespread use of Shinnosuke-kun will contribute to increasing the number of people who can conduct cardiopulmonary resuscitation (CPR) and thereby raise overall survival rates.

Copyright of the paper contained in SUMITOMO ELECTRIC TECHNICAL REVIEW belongs to Sumitomo Electric Industries, Ltd.
The paper is to be used solely for private, reference purpose, and reproduction without the permission of the copyright holder is prohibited.

Meet the Authors of the SUMITOMO ELECTRIC TECHNICAL REVIEW

We at Sumitomo Electric Group are driven to pursue technological innovations to create value for a better world.

Learn more

The History of SUMITOMO ELECTRIC TECHNICAL REVIEW

Learn more