Molybdenum wires
Molybdenum wires for processing
Molybdenum has high melting point as same as tungsten but is easier to be processed. It is mainly used for high-temperature furnace parts, lighting, and electron tube. We have various wire diameters and finishing according to the application. We also offer special materials that have higher performance by adding trace elements (TEM),in our integrated production.
| MOP | The most common pure molybdenum material with high melting point, high temperature strength, good thermal conductivity, low thermal expansion coefficient and excellent workability. |
|---|---|
| MOS | General molybdenum materials may cause pitch irregularities when grids are formed with high-speed coil winders. For MOS type, we improved coiling performance and working range by adjusting components from the raw material stage. |
| TEM | A high quality molybdenum material that has overcome the disadvantages of conventional molybdenum, brittleness and deformation at high temperature. It has excellent high temperature deformation resistance, high recrystallization temperature, and wedge-shaped recrystallized structure. It is excellent in impact resistance even after being used at high temperature; it also allows for deformation processing at normal temperature, with foldability better than pure molybdenum. |
| Application | Non-sag | Shock resistance/ Quakeproof |
Machinability | Wear resistance |
|
|---|---|---|---|---|---|
| MOP | Structural materials, Heaters, Bolts, Nuts | △ | ○ | ◎ | ◎ |
| MOS | Grids, Mandrels, Anchor | ○ | ○ | ◎ | ○ |
| TEM | Supports, Heaters, Bolts, Nuts, Supporting shafts for X-ray tubes | ◎ | ◎ | ◎ | ○ |